Pump Screeds

Home

About Us

Recent Projects

Free Survey & Report

Preparation
Preparation overview
Captive Shotblasting
Grinding

Flooring
Polymer Screeds
Pump Screeds
Epoxy Screeds
Decorative Floor Finishes
Epoxy Coatings
Polyurethane Screeds
Polyurethane Coatings
Self-Levelling Floors
Line Marking
Anti-Slip/Non Slip Coatings
Anti-Static Flooring
Industrial Flooring

Hygienic Systems
Food Hygiene Flooring
Wall Finishes

Floor Repairs
Concrete Repairs
Floor Repairs
Joint Repairs
Garage Floor Coatings
Garage Floor Paint

Flooring by Industry Type
Food & Beverage
Automotive
Aviation
Engineering
Electronics
Pharmaceutical
General Industry
Retail
Office

Flooring Services by Area
Birmingham
Coventry
Derby
East Midlands
Leicester
North West
Nottingham
Stoke
Wolverhampton
West Midlands
Yorkshire
London & South
Warrington
Manchester
Liverpool
Chester
Sheffield
Leeds
Lancaster
Blackpool
Bradford
York

Midlands Regional Office 01952 461600

North West Regional Office 07536 067762

Pump SCREEDS

Pump Screeds

These particular systems can provide a high performance cementitious self smoothing compound which is based on the latest in cerment and polymer technology.

Once mix with water a highly fluid fast setting compound is produced which is suitable for use in industrial environments giving an extremely hard wearing floor surface. The pump screeds can accept full traffic over night including fork lift vehicles. Up to 2000 metre per day can be applied by a suitable pump reducing down time in Fastrack projects.

Can be mixed easily and applied by hand for smaller projects. They are suitable for commercial and industrial applications. Can be left exposed as a wearing surface or over coated with a water based epoxy. Application thickness can be between 5mm - 25mm in one application. The pump screeds can also be used as a leveling screed under neath a wide range of resin coatings toppings as well as vinyl, carpet and other floor finishes.

Areas of application -

Engineering workshops
Automotive manufacturing plants
Printing works
Warehouse refurbishment
Replacing fail greno screeds making good levels after moving failed tiling systems

This project at Tividales Limited involved transforming an old cracked, rough and damaged floor in to a new smooth, dust free floor. The floor was too rough to paint or to apply the 2-3mm self smoothing epoxy screed, so the client opted for a pumpable floor screed to smooth the floor followed by application of a coating to provide a glossy impermeable surface. The client was delighted with the results.

Fastrack visited site to survey the floor, which was found to be badly damaged and unsuitable for coatings to be applied direct. The subfloor was the mechanically prepared to provide a surface suitable for bonding to.

Fastrack recut any large cracks and filled with a tough epoxy repair compound. The whole floor was then primed with an epoxy primer and whilst wet a silica aggregate was broadcast into the primer to provide a textured surface.

Fastrack mixed the pumpable screed outside to maintain a low dust area inside and transferred the product to the subfloor via the hoses. The material is applied by an expert floor layer at the correct speed to maintain the 5mm thickness required. An operative simply blends the flow lines together using a spiked roller.

Fastrack left the screed to dry and then applied two coats of epoxy coating and the final finish can be seen above.

Pump Screeds

website design & website promotion, SEO, by THISWORKS