Fastrack Flooring (Midland) Limited

P.O.Box 597, Telford, Shropshire, TF11 8WG. Tel: 01952 461600   Fax: 01952 463850

An extremely low cost and easy to use fast drying floor coating which produces a tough, attractive and readily cleaned finish for industrial premises. Fastrack Single Pack Paint is the answer to many floor refurbishment projects.
Advantages: Fastrack Single Pack Paint will bond to most clean and dry surfaces, including concrete, steel and timber. No mixing is required and unused material may be stored. Aisle and other area designation is frequently undertaken and a most impressive effect can be created.
Colours Available: Tile Red, Sea Blue, Light Grey, Mid Grey, Dark Grey, Mid Green, Buff, black, White and clear are available.
Pack Size/Coverage: 5 litre tins, covering approximately 40 sq. m. per coat. Two coats are normally applied.
Surface preparation: Prepare new concrete (minimum 28 days), hardened or mildly dusty (laitence) floors with Fastrack Etching Fluid. Oily areas should be treated with Fastrack Degreaser.
Application Procedure: Stir the paint thoroughly and apply by roller or brush. The second coat should be applied as soon as possible after the first coat has dried.
Note: Do not traffic until the paint is dry throughout. Use Fastrack High Build Epoxy Paint for areas subjected to severe usage. Please refer to FaStrack for guidance.
Health and Safety Data: Supplied upon request.
Technical Service: A full application and advisory service is available.